Skip to content
Friday, May 20, 2022

Aluminum Cnc News

Aluminum Cnc Guide

  • Home
  • Cnc Machining
    • Cnc Milling
    • Cnc Turning
    • Swiss Machining
  • Die Casting
  • Laser Cutting
  • MFG Guide
  • Stamping
Electronic

Fuji EVK71-060 New Stock

Posted on 2021-08-20 Author Yoyokuo Comments Off on Fuji EVK71-060 New Stock

Fuji EVK71-060 New Stock Fuji EVK71-060 New Stock Fuji EVK71-060 New Stock Fuji EVK71-060 New Stock Fuji EVK71-060 New Stock

#EVK71-060 Fuji EVK71-060 New 2GTR: 75A600V, EVK71-060 pictures, EVK71-060 price, #EVK71-060 supplier
——————————————————————-
Email: [email protected]

https://www.slw-ele.com/evk71-060.html

——————————————————————-

2GTR: 75A600V

Related Articles

Electronic

NEC SVA150XG04TB New Stock

Posted on 2021-09-20 Author Chinaeye

#SVA150XG04TB NEC SVA150XG04TB New SVA-NEC 15.0 inch Panel 1024×768 450:1 16.7M CCFL LVDS , SVA150XG04TB pictures, SVA150XG04TB price, #SVA150XG04TB supplier ——————————————————————- Email: [email protected] https://www.slw-ele.com/sva150xg04tb.html ——————————————————————- Panel Brand : SVA-NEC Panel Model : SVA150XG04TB Panel Type : a-Si TFT-LCD , Panel  Panel Size : 15.0 inch Resolution : 1024(RGB)×768 , XGA  Display Mode : TN, Normally […]

Electronic

LG LM215WF3-SLA1 New Stock

Posted on 2021-08-03 Author Chinaeye

#LM215WF3-SLA1 LG LM215WF3-SLA1 New LG Display 21.5Inch LCM 1920×1080 330 1000:1 89/89/89/89 16.7M WLED LVDS, LM215WF3-SLA1 pictures, LM215WF3-SLA1 price, #LM215WF3-SLA1 supplier ——————————————————————- Email: [email protected] https://www.slw-ele.com/lm215wf3-sla1.html ——————————————————————- Brand LG Display Model LM215WF3-SLA1   Diagonal Size 21.5 inch Type a-Si TFT-LCD, LCM  Pixel Format 1920(RGB)×1080  [FHD]  102PPI Configuration RGB Vertical Stripe Active Area 475.2(H)×267.3(V) mm Outline Dim 495.6(H)×305.25(V) […]

Electronic

Sharp LQ038Q7DR01 New Stock

Posted on 2021-09-07 Author Yoyokuo

#LQ038Q7DR01 Sharp LQ038Q7DR01 New 3.8 inch LCD diplay new and original. hight quolity., LQ038Q7DR01 pictures, LQ038Q7DR01 price, #LQ038Q7DR01 supplier ——————————————————————- Email: [email protected] https://www.slw-ele.com/lq038q7dr01.html ——————————————————————- LQ038Q7DR01 inverter, LQ038Q7DR01 power supply, LQ038Q7DR01 electronic board, LQ038Q7DR01 VGA board, LQ038Q7DR01 touchscreen available.

Post navigation

NEC NL6448BC33-10 New Stock
NEC NL10276BC30-33E New Stock

More

  • Don’t blacklist SMIC, international semiconductor industry group will warn Trump administration
  • What is the component group of the linear motor drive device of the high-speed machining center
  • Aplication of Laser Cutting Machine in Jewelry Processing
  • Ping An Fu + Smart Medical team up to look at the “number one killer” – lung cancer
  • how the gate of plastic mold works

MFG Guide

MFG Guide

What is the component group of the linear motor drive device of the high-speed machining center

Posted on 2022-05-19 Author Chinaeye

Nowadays, many high-speed machining centers use linear motors to drive linear three-axes. The way high-speed machining centers use servo motors + rolling screws to drive linear three-axes has gradually decreased. At present, most high-speed machining centers have adopted linear The motor drives the linear three-axis, and the linear motor directly drives the linear three-axis, which […]

MFG Guide

how the gate of plastic mold works

Posted on 2022-05-19 Author Chinaeye

The gates of Plastic mold is usually a method or orifice linking the runner to the cavity. It features a little cross-sectional region while it is in contrast to the remainder of the feed method. This little cross-sectional region is required in order that: The entrance freezes right after the cavity is filled in order […]

MFG Guide

Regeneration Of Silicone Oil

Posted on 2022-05-17 Author Chinaeye

The chemical properties of silicone oil are relatively warm, but it will also deteriorate after long-term use due to oxidation and foreign impurities. Due to the high price of silicone oil, it should be recycled and regenerated separately. Waste silicone oil is usually regenerated by two methods. The waste silicone oil in electrical equipment is […]

MFG Guide

Can Silicone Gloves Wash Dishes Well?

Posted on 2022-05-17 Author Chinaeye

In daily cleaning or washing dishes, you need to do it yourself in many places. When cleaning or washing dishes, you need to use detergent or detergent. These things are harmful to human skin and are unprofitable. If you soak in water for a long time, the skin on your hands will become worse and […]

MFG Guide

Internal stress and warping

Posted on 2022-05-16 Author Chinaeye

Internal stress and warping When thick sections are moulded,rapid changes in temperature can cause thermally induced stresses due to differential expansion. If surface layers cool faster than the interior through poor conduction, the contraction of the surface will be greater than the interior thereby setting up stresses which can lead to warping and even failure […]

Cnc Machining

Cnc Machining

How to measure the surface roughness of large parts?

Posted on 2021-12-27 Author Chinaeye

Large parts, such as the engine block of emergency generators, construction machinery or ship engines; truck steering knuckles; or gears and bearings used in wind generators are usually too large and heavy to be performed on fixed roughness measurement equipment Measurement. Nevertheless, the roughness parameters must still be tested. In fact, roughness measurements on large […]

Cnc Machining

How to avoid bubbles or holes in the 3D printing manufacturing process?

Posted on 2021-12-27 Author Chinaeye

Laser powder bed fusion is the dominant additive manufacturing technology and has not yet reached its potential. The problem facing the industry is that sometimes tiny bubbles or holes are formed during the printing process, and these holes form weak points in the final product. In the 3D printing process of parts, when the low-speed […]

Cnc Machining

How to choose the best grinding process for 3D printed parts

Posted on 2021-12-27 Author Chinaeye

For metal production parts manufactured by additive manufacturing (AM), post-processing is usually required, especially on functional surfaces. Abrasive machining including grinding and polishing has the ability to finish machining conventional parts and additive parts (ie, 3D printed parts).  Compared with mechanical processing (such as milling and other alternative finishing processes), grinding has the advantage of […]

Cnc Machining

Cooperative team to solve machine tool supply chain problems: 3D printing may be the first choice

Posted on 2021-12-27 Author Chinaeye

A cooperative team from Oak Ridge National Laboratory solved the problem of the machine tool supply chain. The first step: 3D printing the largest casting. In remote laboratories, scientists and engineers representing public and private companies are working to restore and stabilize the dominance of American manufacturing. The purpose is not to solve the problems […]

Cnc Machining

The Magnesium Alloy Application In Bicycle Frame

Posted on 2021-12-27 Author Chinaeye

The density of magnesium alloy is 1.7, which is only 21% of steel and 60% of aluminum alloy. The advantages of lightweight are very obvious. In addition, magnesium alloy has a series of advantages, in the application of bicycles, it has high rigidity and high bending resistance; excellent shock absorption, absorbing shock and vibration. The […]

Stamping

Die Casting

Categories

  • Cnc Machining (240)
  • Electronic (2,622)
  • Laser Cutting (758)
  • MFG Guide (3,524)
Laser Cutting Service | Stamping Companies | Cnc Machining China | Industrial Links