Skip to content
Thursday, August 18, 2022

Aluminum Cnc News

Aluminum Cnc Guide

  • Home
  • Cnc Machining
    • Cnc Milling
    • Cnc Turning
    • Swiss Machining
  • Die Casting
  • Laser Cutting
  • MFG Guide
  • Stamping
Electronic

PGD150S16 New Stock

Posted on 2021-09-23 Author Chinaeye Comments Off on PGD150S16 New Stock

PGD150S16 New Stock PGD150S16 New Stock PGD150S16 New Stock PGD150S16 New Stock PGD150S16 New Stock

#PGD150S16 PGD150S16 New , PGD150S16 pictures, PGD150S16 price, #PGD150S16 supplier
——————————————————————-
Email: [email protected]

https://www.slw-ele.com/pgd150s16.html

——————————————————————-

PGD150S16

Related Articles

Electronic

Planar EL640.480-A3 New Stock

Posted on 2021-10-14 Author die casting

#EL640.480-A3 Planar EL640.480-A3 New EL640.480-A3 PLANAR 10.2 inch EL 640×480 Grayscale self Parallel Data, EL640.480-A3 pictures, EL640.480-A3 price, #EL640.480-A3 supplier ——————————————————————- Email: [email protected] https://www.slw-ele.com/el640480-a3.html ——————————————————————- Panel Brand: PLANAR Panel Model: EL640.480-A3 SB   Panel Size:10.2 inch Panel Type: EL, EL Resolution: 640×480 , VGA Pixel Format Rectangle Display Area: 206.4(W)×154.8(H) mmBezel Opening- Outline Size : 263(W)×192(H) […]

Electronic

AUO G121SN01 V001 New Stock

Posted on 2021-10-27 Author Yoyokuo

#G121SN01 V001 AUO G121SN01 V001 New AUO 12.1 inch LCM 800×600 400 500:1 70/70/60/50 262K CCFL LVDS, G121SN01 V001 pictures, G121SN01 V001 price, #G121SN01 V001 supplier ——————————————————————- Email: [email protected] https://www.slw-ele.com/g121sn01-v001.html g121sn01-v001 90 https://sites.google.com/view/g121sn01v001/ 4.1189 ——————————————————————- Manufacturer AUO Model Name G121SN01 V001   Screen Size 12.1 inch Screen Type LCM,   a-Si TFT-LCD Pixel Number 800(RGB)×600   (SVGA)  82PPI […]

Electronic

A new round of silicon content improvement cycle is coming, and new opportunities for the semiconductor industry are created

Posted on 2022-08-10 Author die casting

The Links:   FF600R12IP4   LTM10C209AF   IGBT-MODULE

Post navigation

FUJI 7MBR100SD060 New Stock
Hantronix LMDC7P169JD New Stock

More

  • Data-driven x agile development, how does byte practice these two technical concepts
  • injection mold damage
  • Failure mode, impact and criticality analysis and fault tree analysis
  • OPPO Find X2 exposure configuration: 65W flash charge in addition to the top screen
  • How to implement a low-noise, anti-aliasing ADC sampling signal chain design

MFG Guide

MFG Guide

injection mold damage

Posted on 2022-08-17 Author Chinaeye

It is safe to state that any given mold will require a certain amount of repair for damage occurring during the use or storage of that mold. The more it is used, or the longer it is stored, the more damage will occur. Damage that occurs during use includes items such as broken core or […]

MFG Guide

Failure mode, impact and criticality analysis and fault tree analysis

Posted on 2022-08-17 Author Chinaeye

Reliability analysis technology In the reliability design of cnc machine tools, analysis is an important technical means. Reliability analysis is used to understand the defects in product design schemes, and to eliminate potential failure causes in the design stage through design improvements to achieve the purpose of design prevention. In the process of designing and […]

MFG Guide

HK movie mogul Run Run Shaw has died at age 107

Posted on 2022-08-16 Author Chinaeye

Pioneering Hong Kong movie producer Run Run Shaw has died at the age of 107. No cause of death was given in a statement from Television Broadcasts Limited (TVB), which Shaw helped found in 1967 Born in Zhejiang Province near Shanghai, he rose to become what Variety magazine called a pioneer of the 20th century […]

MFG Guide

Four-column hydraulic press power sliding table hydraulic system

Posted on 2022-08-15 Author Chinaeye

Four-column Hydraulic Press power sliding table hydraulic system Why should the blades of the hydraulic punch vane pump be inclined? What is the relationship between the inclination direction and the rotation direction of the rotor? Four-column hydraulic press hydraulic punching vane pump to ensure that the blades can reciprocate normally in the chute without blade […]

MFG Guide

A dust mask that can be reused

Posted on 2022-08-15 Author Chinaeye

In general, the replaceable half face mask can only be replaced through DAO filter cotton and face mask accessories.It is beneficial to reduce the cost of respiratory protection.Now many OF KN100 level dust masks are reusable masks.Good protective effect, economical to use.Can effectively prevent pneumoconiosis. Due to the wide variety of masks on the market, […]

Cnc Machining

Cnc Machining

High-quality plastic parts can be manufactured using pyrometers

Posted on 2022-06-26 Author Chinaeye

Plastic parts are vital in many different industries. New combinations of materials and manufacturing technologies are being developed, especially in challenging applications such as automotive engineering. Continuous fiber-reinforced thermoplastics are a common example of this innovation, which is extremely strong and lightweight at the same time. Automotive engineering is one such field, providing a series […]

Cnc Machining

How to measure the surface roughness of large parts?

Posted on 2021-12-27 Author Chinaeye

Large parts, such as the engine block of emergency generators, construction machinery or ship engines; truck steering knuckles; or gears and bearings used in wind generators are usually too large and heavy to be performed on fixed roughness measurement equipment Measurement. Nevertheless, the roughness parameters must still be tested. In fact, roughness measurements on large […]

Cnc Machining

How to avoid bubbles or holes in the 3D printing manufacturing process?

Posted on 2021-12-27 Author Chinaeye

Laser powder bed fusion is the dominant additive manufacturing technology and has not yet reached its potential. The problem facing the industry is that sometimes tiny bubbles or holes are formed during the printing process, and these holes form weak points in the final product. In the 3D printing process of parts, when the low-speed […]

Cnc Machining

How to choose the best grinding process for 3D printed parts

Posted on 2021-12-27 Author Chinaeye

For metal production parts manufactured by additive manufacturing (AM), post-processing is usually required, especially on functional surfaces. Abrasive machining including grinding and polishing has the ability to finish machining conventional parts and additive parts (ie, 3D printed parts).  Compared with mechanical processing (such as milling and other alternative finishing processes), grinding has the advantage of […]

Cnc Machining

Cooperative team to solve machine tool supply chain problems: 3D printing may be the first choice

Posted on 2021-12-27 Author Chinaeye

A cooperative team from Oak Ridge National Laboratory solved the problem of the machine tool supply chain. The first step: 3D printing the largest casting. In remote laboratories, scientists and engineers representing public and private companies are working to restore and stabilize the dominance of American manufacturing. The purpose is not to solve the problems […]

Stamping

Die Casting

Categories

  • Cnc Machining (241)
  • Electronic (2,720)
  • Laser Cutting (834)
  • MFG Guide (3,908)
Laser Cutting Service | Stamping Companies | Cnc Machining China | Industrial Links