Electronic

TDK.Lambda CXA-L0524-NJL New Stock

2021-08-15 Yoyokuo Comments Off

#CXA-L0524-NJL TDK.Lambda CXA-L0524-NJL New Dimensions (WxDxH) 153×21.5×8.5 (*4) mm, CXA-L0524-NJL pictures, CXA-L0524-NJL price, #CXA-L0524-NJL supplier
——————————————————————-
Email: [email protected]

https://www.slw-ele.com/cxa-l0524-njl.html

——————————————————————-

CXA-L0524-NJL Features

●2 output

●Applicable panel size*: 10 to 12 inches

●With brightness control function (Pulse Wide Modulation mode).

●With shut down function.

●With a sensing function for running out of lamp (alarm output).

●In the high-voltage generator (a terminal and a pattern), an anti-dust measure by silicone application is taken.

(Notice) Applicable panel size becomes a standard.

Other Specifications

●Operating Temperature -30 to +80 ℃

●Storage Temperature -30 to +85 ℃

●Operating Humidity Ratio RH% 95max.

●Weight 21.2 g

●Dimensions (WxDxH) 153×21.5×8.5 (*4) mm

Dimensions (WxDxH) 153×21.5×8.5 (*4) mm

MFG Guide

MFG Guide

Cleaning steps of die casting mold

2022-07-07 Chinaeye

Everyone has a certain understanding of die-casting molds. Here are the cleaning steps of : 1.Clean the mold with kerosene first to ensure that there is no aluminum slag dust and dirt in the right-angle groove holes and other places that are easy to trap dirt. The sliding parts such as parting surface, cavity, […]

MFG Guide

Kickstart: The slow recovery

2022-07-06 Chinaeye

Members of the 202nd Rapid Engineer Deployable Heavy Operational Repair Squadron Engineers (Red Horse) partnered with the 159th Civil Engineering Squadron and New Orleans Parks and Parkways to clear debris from roadways in New Orleans, Sept. 4, 2021.One bit of good news for the U.S. is that the biggest named storm in the Atlantic Ocean right […]

MFG Guide

Injection moulding process variables and their causes

2022-07-05 Chinaeye

Injection moulding process variables and their causes Variable Possible cause Injection pressure 1. Dirty oil; blocked filter 2. Faulty pump; cavitation 3. Faulty relief valve 4. Overheated or cold oil Injection rate 1. Overheated oil 2. Air, water, or sludge in oil 3. Faulty control valve 4. No accumulator, and pump too small for required […]

MFG Guide

The Molding Process Of Carbon Fiber Motorcycle

2022-07-05 Chinaeye

Carbon fiber is a new type of composite material with low density, high specific strength, high specific modulus, small thermal expansion coefficient, high temperature resistance, shock resistance and strong designability. Nowadays, some well-known motorcycle manufacturers in Europe, the United States and Japan have invested huge human, material and financial resources in the research of new […]

MFG Guide

The Application For Silicone Popsicle Molds

2022-07-05 Chinaeye

The Application For silicone Popsicle Molds The new silicone popsicle molds is the food grade silicones, safe to use. So Easy to Use the Silicone Popsicle Molds: Wash the Ice Popsicle Molds in warm and soapy water before first use and rinse and dry completely or place in dishwasher. Don’t use sharp objects like knife […]

Cnc Machining

Cnc Machining

High-quality plastic parts can be manufactured using pyrometers

2022-06-26 Chinaeye

Plastic parts are vital in many different industries. New combinations of materials and manufacturing technologies are being developed, especially in challenging applications such as automotive engineering. Continuous fiber-reinforced thermoplastics are a common example of this innovation, which is extremely strong and lightweight at the same time. Automotive engineering is one such field, providing a series […]

Cnc Machining

How to measure the surface roughness of large parts?

2021-12-27 Chinaeye

Large parts, such as the engine block of emergency generators, construction machinery or ship engines; truck steering knuckles; or gears and bearings used in wind generators are usually too large and heavy to be performed on fixed roughness measurement equipment Measurement. Nevertheless, the roughness parameters must still be tested. In fact, roughness measurements on large […]

Cnc Machining

How to avoid bubbles or holes in the 3D printing manufacturing process?

2021-12-27 Chinaeye

Laser powder bed fusion is the dominant additive manufacturing technology and has not yet reached its potential. The problem facing the industry is that sometimes tiny bubbles or holes are formed during the printing process, and these holes form weak points in the final product. In the 3D printing process of parts, when the low-speed […]

Cnc Machining

How to choose the best grinding process for 3D printed parts

2021-12-27 Chinaeye

For metal production parts manufactured by additive manufacturing (AM), post-processing is usually required, especially on functional surfaces. Abrasive machining including grinding and polishing has the ability to finish machining conventional parts and additive parts (ie, 3D printed parts). Compared with mechanical processing (such as milling and other alternative finishing processes), grinding has the advantage of […]

Cnc Machining

Cooperative team to solve machine tool supply chain problems: 3D printing may be the first choice

2021-12-27 Chinaeye

A cooperative team from Oak Ridge National Laboratory solved the problem of the machine tool supply chain. The first step: 3D printing the largest casting. In remote laboratories, scientists and engineers representing public and private companies are working to restore and stabilize the dominance of American manufacturing. The purpose is not to solve the problems […]